All telecommunication equipment sold in Brazil must be approved by the National Telecommunications Agency (Anatel).
This procedure aims to ensure the quality and safety of products, even wireless network equipment need to receive the seal of Anatel wifi.
To be approved the product must undergo testing, and the procedure is carried out by Anatel through a Designated Certification Body (OCD).
After passing all tests, the OCD issues a Certificate of Conformity, ensuring that all specifications of that equipment are correct.
Better understand what are the specifications to get the wifi anatel seal with this full article that we prepared for you, check it out!
What does Anatel say about Wi-Fi?
When it comes to wifi, the agency considers that signal distribution depends entirely on the physical conditions of the wireless channel.
This means that many factors can interfere with signal quality and slow down the internet.
To obtain higher quality in this distribution, use only approved equipment, as you will be using a product certified by Anatel.
Wifi speed: How should it be?
The wifi speed should support up to 1 Gbps, while the fixed internet speed can reach up to 10 Gbps.
However, usually these speeds are well above what is contracted in the residences, being more than enough for the distribution of the signal on site.
What can contribute to reducing speed, in addition to the quality of the router, is the way it is used and how it was installed.
Even the positioning of the router interferes, if it is close to metal objects or there are walls between the rooms of use of the network, there may be interference of the signal.
Another factor in relation to speed is the amount of people who use the network simultaneously.
For, while a connected device is downloading, for example, the others may receive less speed.
What resolution of Anatel on internet speed?
According to Anatel Resolution 574/11, broadband internet operators must deliver at least 80% of the average monthly transmission rate.
In 2011 Anatel published Resolution 574 of October 28, 2011, where it stipulated that broadband internet operators should ensure the delivery of:
- 60% of the average monthly speed contracted.
- 20% of instantaneous speed (which can be measured punctually).
However, in 2014 there was a change that so far is in force, and currently operators are required to deliver:
- 80% of the average monthly speed contracted.
- 40% of instantaneous speed.
Anatel Wifi: Wifi devices that need Anatel homologation
Get to know now the main wifi devices that must be certified by Anatel in order to be marketed in Brazil.
Optical Cables and Optical Fibers
Optical cables and optical fibers are light-transmitting data-transmitting equipment, and optical fiber is the main technology used by most operators.
The certification is based on Type Testing and some items must undergo Periodic Evaluation of the Product and the Manufacturing Management System every 1 year.
Some items that are part of this product class are:
- Fiber Optic Cables,
- Marinized Terrestrial Optical Cable;
- OPGW cable;
- Hybrid Optical Cable, among others.
Cables For Data Transmission
Cables for data transmission require certification based on Type Testing and Periodic Evaluation of the Product and The Manufacturing Management System every 1 year, and they can be:
- Unshielded Data Transmission Cable, or;
- Shielded Data Transmission Cable
Connectors
The connectors are several parts with the function of connecting the equipment, such as the modem to the router, for example.
The certification of these products is based on Type Testing, and some examples of connectors that need homologation are:
- General Distributor Terminal Block (BT-DG);
- External Network Terminal Block (BT-RE);
- Internal Network Terminal Block (BT-RI);
- Air Optical Terminal Box;
- Underground Optical Terminal Box, among others.
Splitter
Splitters are passive optical network components that act as an optical signal distributor, very useful on the wifi network.
Their certification is based on Type Testing with Periodic Evaluation of the Product and the Manufacturing Management System every 1 year.
The templates that must be certified are:
- XDSL Filter – Central Splitter;
- XDSL Filter – Residential Splitter;
- XDSL Filter – Residential Microfilter;
- XDSL Filter – Splitter for Public Telephony.
As there are many equipment that should be homologated by Anatel wifi, you can consult the complete list by clicking here.
How to register wifi equipment in Anatel?
To get the registration of wifi equipment in Anatel you need to obtain the certificate of Conformity and then enter the application for approval in the body.
The company that needs the product certification must hire an OCD, which will recommend a laboratory enabled by Anatel to perform the tests and tests, according to the specifications of each product.
If the product complies with the prerequisites, the OCD issues the certificate and the company can proceed in the approval process with Anatel.
Make your Anatel certification with the Master!
When choosing OCD to obtain Anatel certification, count on the experience of those who have been working for more than 15 years with transparency, aiming at the best cost-benefit for your projects.
Learn how Master helps you achieve Anatel Certification!
Conclusion
Now you already know how important it is to get the Anatel wifi homologation before marketing products from the telecommunications sector.
As the listing of these products is updated periodically by the agency, always keep up to date so as not to run the risk of getting irregular.
Here at Master Certifications, in addition to helping you obtain your Certificate and start the approval process, we always keep you informed with the news.
Keep your company's products regularized to avoid problems such as asset seizures, fines, and other penalties.
Count on Master to stay up to date, our content helps you stay on top of all the news about the telecommunications market.